Jun 5, 2023 · Hello folks just posting on here with my results from printing a benchy at about 3.5x scale using a 1.0 mm nozzle see stats and pics below.

May 27, 2024 · So, recently I started to explore the world of the bigger nozzles ending up with a 1.0mm. Now I try printing vases and nothing good happens.

Dec 31, 2021 · I've been told anything below 0.2mm will clog so often it's not worth it. I've done some prints with 0.25mm nozzles and the main downside was ...

Dec 19, 2020 · It's a pretty easy calculation for a 1 mm nozzle. If your max volumetric extrusion rate is 9 mm3 /s, just make sure your layer height multiplied ...

Dec 24, 2019 · So I'am printing on my Prusa MK3 only with a 0.25mm nozzle, and I was curious if I could go even smaller than 0.2mm.

Oct 18, 2022 · Trying to learn printing with 1mm nozzle. Are these artifacts on edges avoidable? 0.75 layer height with 1.20 width. Too much width?

Jan 4, 2024 · I am trying a 1mm nozzle for the first time. Trying to achieve large and thick layers. I am having an issue with my bottom layer.

Mar 20, 2023 · Layer height is probably too much for a 1mm nozzle, especially only at 215c. Try 10-15 degrees hotter. 50%-60% of nozzle diameter is a better ...