Jun 5, 2023 · Hello folks just posting on here with my results from printing a benchy at about 3.5x scale using a 1.0 mm nozzle see stats and pics below.

Apr 18, 2023 · Hi guys, I prepared a print for a cilinder with prusaslicer: vase mode, no top-bottom layer, one side (1 mm) and nozzle 0.6).

Jan 14, 2019 · More notes here. I've been printing some luscious functional parts using a 1.00mm nozzle and it's great fun watching the extruder spin at ...

Dec 19, 2020 · It's a pretty easy calculation for a 1 mm nozzle. If your max volumetric extrusion rate is 9 mm3 /s, just make sure your layer height multiplied ...

Feb 14, 2022 · Using a 1.8mm nozzle on 1.75mm filament? You'd have to slow the printer down to a halt and let it just drip out.

Dec 24, 2019 · So I'am printing on my Prusa MK3 only with a 0.25mm nozzle, and I was curious if I could go even smaller than 0.2mm.

Mar 10, 2023 · So with a 1mm nozzle, 0.75mm should be your maximum layer height for decent adhesion. Using a layer height equal to the nozzle diameter ...

Jan 19, 2022 · I've been using a .3 layer height and quite like it. I want to lean into the 3D printed 'look' of parts. A bunch of stuff being very functional ...