Apr 28, 2024 · Bored a stock nozzle on an original ender 3 to 1mm. The machine is stock for the rest. Printed in 19min (50 ish min with the stock 0.4mm ...
Oct 18, 2021 · 0.12mm layer height with a 0.4mm nozzle is pretty normal and it's an even lower ratio than 0.32mm/1.0mm - unless your material is exceptionally ...
Missing: 1cfbqxw/ bored_a_stock_nozzle_to_1mm/
Dec 19, 2020 · In a later comment i addressed this but not fully. I said wall thickness effects the quantity of filament extruded. I think we are both right ...
Missing: 1cfbqxw/ bored_a_stock_nozzle_to_1mm/
Jan 19, 2022 · I've been using a .3 layer height and quite like it. I want to lean into the 3D printed 'look' of parts. A bunch of stuff being very functional ...
Missing: 1cfbqxw/ bored_a_stock_nozzle_to_1mm/
May 23, 2018 · I drilled a hole in a piece of leftover wood to seat the nozzle and further held it on place with an adjustable wrench. 1mm Layer height 20-30mm ...
Missing: 1cfbqxw/ bored_a_stock_nozzle_to_1mm/
Oct 6, 2016 · What kind of adhesion technique are you using? I'm struggling to print 0.6 layers with a 0.8 nozzle because the first layer starts to unstick ...
Missing: 1cfbqxw/ bored_a_stock_nozzle_to_1mm/
Dec 24, 2021 · I need help, recently i bought a 1mm nozzle and i've been trying to print this several times and everytime the nozzle knocks the print and ...
Missing: 1cfbqxw/ bored_a_stock_nozzle_to_1mm/
Oct 8, 2022 · Is there a reason you can't place the back side flat to the bed? Cant see if it's flat… maybe for strength reasons?
Missing: 1cfbqxw/ bored_a_stock_nozzle_to_1mm/
In order to show you the most relevant results, we have omitted some entries very similar to the 8 already displayed.
If you like, you can repeat the search with the omitted results included. |