Jul 12, 2023 · Les premières couches s'impriment plutôt bien, mais commencent à devenir vraiment mauvaises une fois le remplissage commencé. Quelqu'un aurait- ...
Jul 12, 2023 · Trying to use a 1mm nozzle (0.5 layer height and generic PLA settings in Cura) but the infill keeps staying stuck to the nozzle until the ...
Missing: tl= | Show results with:tl=
2 days ago · And while paper trick will get you a rough z offset value, it's usually not good enough for a great first layer.
Missing: 14x901v/ help_with_1mm_nozzle tl=
Jan 14, 2024 · What can I do to fix this? I have a Elegoo Neptune 3 Pro. Using Polymaker CosPLA filament. Nozzle is 0.4. Nozzle temperature was set to 215.
Missing: 14x901v/ help_with_1mm_nozzle tl=
Feb 6, 2024 · Hello All, I am trying to level the bed of my Neptune 3 Plus. I have had it for a couple months and have no success in getting the bed right ...
Missing: 14x901v/ help_with_1mm_nozzle tl=
Feb 18, 2023 · This setting lifts the nozzle in the Z direction before it moves horizontally, sometimes pulling plastic along with it, causing stringing.
Missing: 14x901v/ help_with_1mm_nozzle tl=
Mar 8, 2024 · When i get something like this is because i print too fast for the material. Not because your printer can go this fast that your filament can, ...
Missing: 14x901v/ help_with_1mm_nozzle tl=
Aug 15, 2023 · So basically I designed a Model. I had several print failures (now 5) with this model even though I re-modeled it and sliced it differently.
Missing: 14x901v/ help_with_1mm_nozzle tl=
In order to show you the most relevant results, we have omitted some entries very similar to the 8 already displayed.
If you like, you can repeat the search with the omitted results included. |