Jul 12, 2023 · Trying to use a 1mm nozzle (0.5 layer height and generic PLA settings in Cura) but the infill keeps staying stuck to the nozzle until the ...
Jun 23, 2023 · How are they working out? Reviews said the length was a bit shorter than the stock Ender ones, is it the same for the plus?
Missing: 14x901v/ help_with_1mm_nozzle/
Jul 12, 2023 · Les premières couches s'impriment plutôt bien, mais commencent à devenir vraiment mauvaises une fois le remplissage commencé. Quelqu'un aurait- ...
Feb 27, 2024 · Unscrew the nozzle, preferably with a socket. Replace the nozzle, wait a minute or two for the new nozzle to heat up and slightly torque a bit ...
Missing: 14x901v/ help_with_1mm_nozzle/
Feb 18, 2023 · I have been trying to print the cute little octopus on my Neptune 3 but when printing the legs the filament is curling upwards at the edge ...
Missing: 14x901v/ help_with_1mm_nozzle/
Mar 8, 2024 · Just a question. If the z offset is too low, why are the brim lines are still not connected? The brim theoretically needs to extend the first ...
Missing: 14x901v/ help_with_1mm_nozzle/
Feb 6, 2024 · Hello All, I am trying to level the bed of my Neptune 3 Plus. I have had it for a couple months and have no success in getting the bed right ...
Missing: 14x901v/ help_with_1mm_nozzle/
Aug 15, 2023 · So basically I designed a Model. I had several print failures (now 5) with this model even though I re-modeled it and sliced it differently.
Missing: 14x901v/ help_with_1mm_nozzle/
Aug 14, 2023 · r/3Dprinting - What causes these weird gaps in my first layer? 30 upvotes · 21 comments ...
Missing: 14x901v/ help_with_1mm_nozzle/
2 days ago · I managed to solve this by using an 8-line brim and reducing the first layer's printing speed to 30mm/s. It seemed to work until this latest ...
Missing: 14x901v/ help_with_1mm_nozzle/
In order to show you the most relevant results, we have omitted some entries very similar to the 10 already displayed.
If you like, you can repeat the search with the omitted results included. |