Feb 9, 2024 · I'm printing PLA at 220°C, 0.4mm layer height, at 30mm speed. Also, when printing I can clearly hear the filament popping, which does not happen ...
People also ask
What is the best layer height for a .4 nozzle?
Can a damaged nozzle cause stringing?
What layer height for 1.0 mm nozzle?
What is the largest nozzle for Ender 3?
May 14, 2020 · Trying to print with a 1mm nozzle for the first time and I'm getting a bunch of weird surface problems. Details in comments.
Missing: 1amj3yx/ trying_out_a_1mm_nozzle/
Dec 17, 2020 · 1mm nozzle, default .32LH in cura. Spiral mode. 220 hot end, 30mm print speed. Is it normal for a 1mm nozzle to be so rough quality?
Missing: 1amj3yx/ trying_out_a_1mm_nozzle/
May 23, 2021 · Increase nozzle temp a bit to 225, use at least 2 walls, use at least 4 top layers.
Missing: 1amj3yx/ trying_out_a_1mm_nozzle/
r/FixMyPrint: The community of r/FixMyPrint will help you fix your 3D printer settings for the most optimal prints.
Missing: 1amj3yx/ trying_out_a_1mm_nozzle/
Jun 5, 2023 · 17 votes, 18 comments. Hello folks just posting on here with my results from printing a benchy at about 3.5x scale using a 1.0 mm nozzle see ...
Missing: 1amj3yx/ trying_out_a_1mm_nozzle/
Jan 13, 2022 · Hi All! Switched to a 1mm wide nozzle. Line width is 1.5mm, layer height .5mm. Temp 245, speed 15mm/s. I have tried with both PLA and PETG, ...
Missing: 1amj3yx/ trying_out_a_1mm_nozzle/
Jul 11, 2022 · Hi. I switched today from a .4 to a .8 nozzle on my Ender 3 V2. I updated the settings in the slicer. I'm trying to print with a .56 layer ...
Missing: 1amj3yx/ trying_out_a_1mm_nozzle/
Dec 24, 2021 · I need help, recently i bought a 1mm nozzle and i've been trying to print this several times and everytime the nozzle knocks the print and ...
Missing: 1amj3yx/ trying_out_a_1mm_nozzle/
In order to show you the most relevant results, we have omitted some entries very similar to the 9 already displayed.
If you like, you can repeat the search with the omitted results included. |