Oct 10, 2022 · I just it want to go fast, and reliably. My idea is to use a 1mm or 0.8mm nozzle that I have, to print PLA. Do you guys have any tips on what I ...
People also ask
What is the best layer height for Ender 5 Plus?
What size filament for Ender 5 Pro?
How fast can Ender 5 Plus print?
What size nozzle comes with Ender 5 Plus?
Sep 21, 2020 · I only used 0.4 nozzles so far, and I got nice prints. I just got 1mm nozzle and I want to ask if anyone has experience with those and are ...
Missing: y08kh5/ high_speed_print_with_1mm_nozzle_tips/
Oct 10, 2022 · Supprimer le filtre r/ender5 et étendre la recherche à l'ensemble de Reddit ... icône r/ender5. Accéder à ender5 ... comments. Partager. Ajouter un ...
Feb 14, 2023 · Last week I needed to print some larger parts, so I wanted to fix auto-leveling, as it's rather important for printing larger models. I tried ...
Missing: y08kh5/ high_speed_print_with_1mm_nozzle_tips/
Sep 22, 2020 · Some things that I read on it was that temperature needs to be higher because you want to melt more filament (the extruded line is sooo thick).
Missing: y08kh5/ high_speed_print_with_1mm_nozzle_tips/
Mar 9, 2023 · I just got an Ender-5 S1 and I'm having a strange problem. I manually leveled the bed (using a piece of paper and adjusting the (4) bed levelers ...
Missing: y08kh5/ high_speed_print_with_1mm_nozzle_tips/
Jan 28, 2024 · Hello All, so far using the Ender 5 S1 with stock firmware has been really reliable and consistent for smaller prints.
Missing: y08kh5/ high_speed_print_with_1mm_nozzle_tips/
Ender 5 Pro - 0.8mm nozzle - need help with calibration : r/ender5
www.reddit.com › ender5 › comments
Dec 10, 2022 · Is anyone else using 0.8mm nozzle? Switched nozzle to 0.8mm for better speed on 'rough/draft' prints but cant get rid of stringing and 1st layer ...
Missing: y08kh5/ high_speed_print_with_1mm_nozzle_tips/
Dec 29, 2022 · So I got an Ender 5 Pro for Christmas and the day after I set it up and it worked great. I was also gifted a CR Touch.
Missing: y08kh5/ high_speed_print_with_1mm_nozzle_tips/
Aug 4, 2022 · My guess would be the Z-probe offset needs to be adjusted to get better bed adhesion. It looks like it's dragging the filament around instead of ...
Missing: y08kh5/ high_speed_print_with_1mm_nozzle_tips/
In order to show you the most relevant results, we have omitted some entries very similar to the 10 already displayed.
If you like, you can repeat the search with the omitted results included. |