Having two TACACS servers, I doubt both will ever be down, but in the event I would like Local usernames to work. If I apply an access list to 0 4 and use SSH, ...

I have an ACS v.4.x to use as a Tacacs server. In all the equipments I have aaa authentication with tacacs and vlans. To test the ...

I have done a setup where I created local accounts on the TACACS server (Cisco ACS 5.x). I then setup the authentication and authorization so that the user ...

Solved: I have my switch configured for tacas then local: aaa authentication login default group MYGROUP local And that works fine -- I can log in via tacas ...

I have a new router which about every 2-3 mintues tries to authenticate to the TACACS server. With variuos usernames like: rb: User Access Verification own ...

Hello all I had an issue yesterday where a remote location's link went down. We thought the router was configured for both local login and TACACS+ ...

i have configure a tacas server and it works fine. but i have many problems: 1. when i login with a tacacs user it logs me in without exec mode (enable mode).

My LAN system is in a different zone behind firewall only. Now, Issue here is that both my cisco Routers are accepting TACACS authentication and work fine.