People also ask
What size is er16 collet?
ER Collet | Length | Clamping Range |
ER-16 | 27.5 mm (1.08") | 0.5—9 mm (0.020—0.354") |
ER-20 | 31.5 mm (1.24") | 1—13 mm (0.039—0.512") |
ER-25 | 34 mm (1.34") | 1—16 mm (0.039—0.630") |
ER-32 | 40 mm (1.57" | 1—21 mm (0.039—0.827") |
What is the difference between a collet and a chuck?
Collets Vs Jaw Chucks. Collets and chucks are two common types of mechanism used to hold spindle tooling or workpieces. Technically speaking, a collet is a type of chuck, but the two terms are usually used exclusively. A 'chuck' usually refers to any type of work holder which is not a collet.
What does the ER collet stand for?
The "ER" name came from an existing "E" collet (which were a letter series of names) which Rego-Fix modified and appended "R" for "Rego-Fix". The series number is the opening diameter of the tapered receptacle, in millimetres.
How do you install an ER collet?
Mounting instructions for ER collets and nut:
1
Put the collet into the nut, turn the collet slightly. ...
2
Fix the nut and the collet on the spindle rotate the nut until the collet is in pressing, wipe the straight shank of cutter and insert it into the pilot hole.
In order to show you the most relevant results, we have omitted some entries very similar to the 1 already displayed.
If you like, you can repeat the search with the omitted results included. |